There are numerous home theater projectors in the market nowadays. However, each of them is unique in their own way. With that said, you will need to put a number of factors into consideration when you will purchase your own home theater projector. The following factors should be able to help you find the best one for your home. This post focuses on home theater projectors for a guide on the top gaming projector click the link.
The brightness of the projector is the first thing you need to consider. Such brightness is usually measured in ANSI lumens. The brightness of projectors usually range from 1000 lumens up to 2500 lumens and even more. In order to determine how much lumens you need for your projector, you will have to evaluate your viewing environment. The brighter your viewing environment is, the more lumens you will need for the projector. You will need 1000 lumens or more for a dedicated home theater. A room with a little ambient light will need at least 1500 lumens. On the other hand, you will need at least 3000 lumens for a room with higher levels of ambient light.
You also need to take a look at the image quality. The native resolution, sour material, and the contrast ratio of the projector are the three important factors that affect the image quality. At present, the most common resolutions for home theater projectors are Wide XGA and HD. An HD projector has double the number of pixels that a Wide XGA unit has. A higher number of pixels means that the image will look sharper and is more compatible with a high-definition source.
The source that you are watching will also affect the image quality. If the projector is fed with a low quality signal, then, it will most likely project a low quality image. For that matter, you need to match the resolution of your source material with the projector that you will be buying.
For the contrast ratio, this refers to the difference between the whitest white and blackest black in a certain image. If the projector is unable to display the gray areas, the image may appear to be pixelated. For this matter, you should look for a projector unit that offers more control settings. BrilliantColor, sRGB modes, and other multi-color processing technology allows you to freely set the display according to your preference.
A projector has a native aspect ratio. The most common ratios for most projectors are 16:9, 16:10, and 4:3. For home theater use, the 16:9 native aspect ratio is the best one that you should get. HDTV signals, DVD, and BluRay are actually broadcast in this ratio. It is also closer to the film format of 35mm. Even though projectors with 4:3 ratio can display wider images, letterboxing will take place where black boxes typically appear at the top and bottom of the screen.
3D home theater projectors are also becoming more and more common nowadays. Almost all projector manufacturers offer 3D models for their products. Their prices are dropping so you can probably take advantage of one.
With regards to lamp life, DLP and LCD projectors typically have about 2000 to 4000 hours of lamp life. In reality, this refers to its half-life or the time when the lamp shines brightly as it should be. When the lamp reaches its half-life, it will be dimmer and lose its brightness gradually. You will incur lesser expenses for projector maintenance if the lamp life is longer.
You will need to factor in lamp replacement costs if you plan to use your projector as a television, which usually range between $200 to $400. However, if you will only be using the projector for special events or watching movies, then, lamp life will not be as important.
You also have to think about the set up of the projector, whether it be mounted or placed on a tabletop. Both of these options have their pros and cons. With the former, you will have more floor space yet less time to set up the projector when you want to use it. With the latter, you will be able to move it from one place to another, depending on where you want it to be. If you choose the former, though, you should first mount the projector first before buying the screen. This way, you can check which screen is suitable for your unit.
Other factors also include Frame Interpolation, DEEP color, as well as those things that might be impressive for your friends and loved ones. These might include back lit remote control, 120Hz refresh rate, and others. Whatever the case may be, you should always think about all of these factors first before you even decide to make your purchase for a projector that you will use for your own home theater.
Information sourced from here.